Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch
Electronics Black Wrist Watch

GEO-LOK Inclinometer Casing

Category: Geotechnical & Civil Engineering Instrumentats

SIMPLE ASSEMBLY AND DISASSEMBLY

COMPATIBLE WITH ALL INCLINOMETER PROBES

MACHINE-BROACHED GROOVES

GEO-LOK inclinometer casings are made of ABS pipes and are fitted with proprietary joints that require no glues, rivets, or shear wires to connect adjacent sections of pipe.

 

Request A quote Contact Us

GEO-LOK inclinometer casings are made of ABS pipes with four orthogonal grooves running longitudinally along its inside surface with a spiral control of less than 1/3° per 3 meters of casing. When installed in a borehole, one set of grooves is aligned in the anticipated direction of movement. The grooves act as guides for the wheels of the inclinometer probe, maintaining the orientation of the probe as it traverses the casing.

 

The proprietary joints of the GEO-LOK inclinometer casing require no glue, rivets or shear wires to connect adjacent sections of pipe. The joints are made by pushing two sections of pipe together and rotating the pre-installed threaded locking collar. The coupling ensures that the grooves of adjacent sections of pipe are aligned to form a continuous track for the inclinometer probe. O-rings at the joint prevent the ingress of water and grout.

 

Spiral surveys may be performed on deep installations, or where high accuracy is critical. Spiral data allows inclinometer data to be corrected for twisting of the casing that may occur during installation.

 

Specifications

 

  CASING  
  Length   1.5 m / 3 m
  OD   70 mm / 85 mm
  ID   59 mm / 72 mm
  Coupling OD   72 mm / 87 mm

 

 

  TELESCOPIC SECTION  
  OD   73 mm / 89 mm
  Length, fully extended   791 mm
  Length, fully compressed   639 mm

 

 

  WEIGHT  
  70 mm casing (1.5 m / 3 m)   1.79 kg / 3.42 kg
   85 mm casing (1.5 m / 3 m)   2.25 kg / 4.81 kg
   70 mm telescopic section   0.76 kg
   85 mm telescopic section   1.04 kg

 

 

 

  GEOLOK CASING 70mm -2.75’’  
    Spiral: ≤1/3° per 3m
    Load rating: 680kg, 1500 lbf
    Collapse rating: 17 bar, 245 psi
    Temperature rating : -30 to 80°C

 

 

  GEOLOK CASING 85mm -3.34’’  
     Spiral: ≤1/3° per 3m
     Load rating: 680kg, 1500 lbf
     Collapse rating: 13 bar, 190 psi
     Temperature rating : -30 to 80°C

 


Ordering Info

 

Please specify:

  •     Casing length & diameter
  •     Top and bottom caps
  •     Accessories

 

Optional accessories:

  •     Telecopic sections
  •     Protective lockable steel cap for casing
  •     Plug grout valve with quick connect & optional anchor (1 hydraulic coupling socket required)
  •     Plug grout valve with gasket and optional anchor
  •     Plug anchor